Nanolex Heavy Cut Polish

Achieve a flawless paintwork finish with Nanolex Heavy Cut Polish, the ideal solution for deep scratches and severe defects

Deep-action polish for maximum cut

Nanolex Heavy Cut Polish is a highly effective abrasive polish that has been specially developed to effectively remove deep scratches, severe swirls and paintwork defects up to a 2000 grit, while providing a very good finish. This polish contains advanced calcined aluminium oxide abrasives that allow for quick and efficient defect correction, while also leaving a smooth surface with a good finish. Nanolex Heavy Cut Polish is ideal for use on all paint types and can be applied by hand or machine. It is perfect for professional detailers who need a powerful polish to remove heavy paint defects and create the basis for the next polishing step.

Buy now Heavy Cut Polish

Nanolex heavy cut polish professional paint correction compound for aggressive scratch and defect removal

Nanolex Abrasive Polishes and Pads

Nanolex Heavy Cut Polish was developed, tested, and produced in Germany

Maximum abrasion: Removes deep scratches, swirls and severe paint defects.

Advanced abrasives: Ensures quick and effective defect correction.

Ideal for all paint types: Suitable for all paint types, including hard and soft paints.

Glossy finish: Leaves a uniform finish for the next polishing step.

How to use Nanolex Heavy Cut Polish?

Nanolex Heavy Cut Polish is the ideal product for removing deep scratches and sanding marks from your vehicle. Use Nanolex Heavy Cut Polish in combination with Nanolex Heavy Cut Polishing Pads, which are available in various sizes and designs, to achieve optimal results. After applying Nanolex Heavy Cut Polish, we recommend using Nanolex Medium Cut Polish or Nanolex Finishing Polish to achieve the perfect finish and maximize your vehicle's shine. Combine this product with other Nanolex care products to achieve optimal care results and preserve your vehicle's condition.

Preparation

Thoroughly clean the paint surface and make sure it is free of dirt and dust.

Application

Apply a small amount of Nanolex Heavy Cut Polish to a Nanolex Heavy Cut Polishing Pad.

Buffing

Spread the polish with slow movements using a rotary or eccentric polishing machine, slowly increasing the speed until the polish film becomes transparent.