Auf DeutschProtecting your car’s paint from insects is crucial to maintaining the aesthetic appearance, longevity, and value of your vehicle. Repairing or repainting a car can be costly, so preventative paint protection can prevent unnecessary high costs. Based on our twenty years of experience providing the best car care solutions, we offer ways to remove insects from your car and prevent them from reattaching, including DIY solutions.
Protecting car paint from insects
Why is it necessary to adequately protect the car from insects?
While driving, collisions with insects at high speeds leave stains on the surface of the car, which can negatively affect the paint, headlights and trim of the car:
Physical damage to the car’s surfaces
Collisions on the car’s surface, especially the protective coating, can cause micromechanical damage to the paint surface. Furthermore, dried insect remains can cause additional mechanical damage during cleaning by scratching the paint surface and leaving stains, which impairs the shine.
Acids secreted by insects
Insects contain various types of acids that penetrate deep into the pores of microscopic surface damage, gradually damaging it. This damage can be exacerbated by other factors such as UV rays, moisture, or other external influences.
Chemical reactions
Chemical reactions between insect acids and paint can weaken the surface’s protective layer, making it vulnerable to further damage such as oxidation and corrosion. Plastic surfaces lose their shine, and headlights can take on a dull, yellow tint.
Ways to protect the surface of the car from insect damage
There are various methods people use to protect their vehicles from insects. At Nanolex, we’ve tested several approaches, including protective films, regular cleaning, and finally, the application of protectants. We can confidently confirm that the appropriate application of protectants, along with regular cleaning and maintenance, is the only way to protect your car from the unwanted effects of insect collisions. The safest way to fully protect your car is with Nanolex ceramic coatings , which provide 100% protection.
Applying protective agents
The best way to protect headlights, paint, and plastic surfaces from insects is with ceramic coatings, which create a barrier between the paint and external influences, including insect acids. At Nanolex, we have developed products that have proven effective over the years in cleaning and protecting cars from insects.
To achieve the full potential of Nanolex ceramic coatings, the car surface must be thoroughly cleaned beforehand. Nanolex has developed a complete range of cleaning products that enable optimal preparation for the application of protective coatings.
Cleaning insect residue from the surface of the car
The actual process of cleaning insect residue from car paint can be challenging, as it can cause additional scratches and damage to the surface. Another challenge is choosing the right product for your car.
How to choose an insect cleaner and repellent?
There are many products on the market whose primary purpose is to remove and protect against insects. However, to choose the best product for you and your car, there are a few important things to consider:
Premium Quality and Protection
Protection and long-lasting performance should be your top priority when choosing a product to care for your car.
High alkali content
allows for the effective dissolution and removal of insect residue without damaging the paint.
Easy to use
If you’re more of a do-it-yourself type, all our products are easy to use and guarantee optimal results without much effort.
Environmentally friendly
If you care about the environment as much as we do at Nanolex, you have come to the right place because our products are environmentally friendly and safe for all types of vehicles.
Schnelle Ergebnisse
Zeit ist kostbar, wählen Sie daher Produkte, die es Ihnen ermöglichen, Ihr Fahrzeug schnell und effizient zu reinigen und zu schützen.
Cleaning process of insects
Preparing for cleaning
The first step is to perform a pre-wash to soften the residue and make it easier to remove. We recommend using Nanolex PreWash Gel or Nanolex Snow Foam . Let it work for a short time and then rinse with clean water.
Applying the insect remover
After rinsing, apply a highly concentrated insect remover, such as Nanolex Insect Remover Gel , directly to the surface you want to remove the insects from. Leave it on for a few minutes, but not too long to prevent it from drying out.
Cleaning
When cleaning, never use coarse brushes or rough movements to remove insect residue, as this can cause further microscopic damage. We recommend using the specially designed Ultra Plush Wash Pad sponge to gently remove insect residue without causing further damage to the surface. Rinse thoroughly with water and dry.
Protecting the car surface after cleaning
After successfully removing the insects, it’s important to protect the surface to prevent future damage and adhesion. Dry the car’s surface with a soft microfiber cloth, such as the Ultra Drying Towel . When applying the coatings, wear protective gloves and follow the instructions. Do not apply the coatings in direct sunlight, and ensure the car’s surface is not hot, humid, or dirty. At Nanolex, we have developed several premium ceramic coatings that provide long-lasting protection against insects and other external influences:
Nanolex Si3D Headlight & Trim
This coating provides excellent protection for headlights and plastic trim and mirror parts, the vehicle surfaces most exposed to insects. This coating also makes headlights and plastic parts more resistant to UV radiation, chemical attack, and oxidation, restoring the shine and new appearance of the surfaces.
Nanolex Si3D Headlight & Trim
Nanolex Si3D APX
All Purpose Exterior – our most advanced coating offers maximum durability and exceptional hydrophobic properties, protecting your car from all external influences, including the negative effects of insects. We’re very proud of this revolutionary coating, which can be applied to all exterior surfaces of your car.
Si3D APX
Nanolex Si3D Trim:
This coating protects windshield wipers and plastic car parts from insect damage. In addition to its protective properties, this coating restores the original color and shine of plastic surfaces.
Si3D Trim
Follow these steps to get rid of the insects on the surface of your car
By following the steps mentioned and combining these products, your car will not only look great but will also be protected from harmful effects of insects and other external factors.
For nearly 20 years, Nanolex has built its name on a love of cars. It all began with a passion for cars and a fantastic partnership and friendship. Today, as experts in the auto detailing industry, we strive to provide top-notch products and solutions for your car. Your car deserves the best care and protection, and we’re here to make that happen. Learn more about us here .
Below you will find our other blog posts for more useful information on how to properly care for your car.
Discover more Nanolex blogs
How to properly wash a matte car
Caring for a matte car can sometimes be frustrating and tedious. Learn how to properly [...]
